Purchase
from Amazon:
Link
- 1' 3.5mm Male Right Angle to 3.5mm Female Gold Stereo Audio Cable,
dangle
3 outside EWS box for
easy
Power &
Audio &
Preview connection
(Ideal)
Link
- 12 volt AC transformer with earth ground
prong, ideal for this project.
(Ideal)
You
need a good earth ground, 12 volts AC,
DC or Switching Supply will work
Connect
the proper length TRS cable to the
transformer for connecting to the
Phoenix 2020.
Link
- β Antenna C-253 spring/coil for an
ideal linear pitch field (a
modern day discovery)
(Ideal)
Link
- old Acorn End Cap Flag Pole Topper Finial (Fits 3/4 in. Pole)
Link
-
you
could use 2 @ 6 ft or more for
audio output to
computer & power
supply connection
Link
- Ferric Chloride PCB Etchant
visit
this page for an alternative
Link
- Copper Clad Single Side PCB Laminate Board
12" x 12"
(one piece you cut 3" x 8"
or 75 x 200)
This ships from Parts Express
Link
- Tinnit to Tin plate your board,
highly recommended, follow my directions.
This ships from
Parts Express - so ship with copper
clad board to save on shipping.
Link
- Plastic 18" Sleeve to keep circulating
air off the sensitive spring/coil pitch antenna.
Arrived
in 4 day USPS Home
Depot has online products
Link
- Extra clamp to keep Electrodeum
pitch antenna securely in place.
Link -
1/4" x
1/4" x 3' square wood dowel to
support β Antenna spring/coil
(get at local hardware store)
Extras:
Link
- Vactrol VTL5C1 used in my PWM volume
control. Higher last numbers will not
work, too slow.
Link
- Use for no heat Toner Transfer to
copper clad board, Sally Hansen Nail Polish Remover
Link
- $14 VOM Meter with Transistor,
Hfe, Frequency, Capacitance, etc Amazon
Link
- Jonard Tools AT-6241 Non Conductive Alignment Screw Driver 7"
Link
- Jonard Tools AT-6241 Pack of 10 Amazon
Link - $20 TaoTronics Wireless Portable Bluetooth Transmitter
Amazon
Link - $20 Bluetooth Headphones, Hussar Magicbuds
Amazon
Link - Acetone ?
Link
- EWS 5-Pin Din Socket
*
This project will fit inside an EWS
box, purchase one cheap that does not work. *
download
|